PVC Waterstops extrusion Production Line
- Chen Nathan
- Aug 4, 2022
- 1 min read
Updated: Sep 3
Plastic PVC Waterstops are produced from high-grade PVC compounds. They are designed for sealing movement and construction joints in reinforced concrete structures.
PVC Waterstops, used in concrete for the sealing of construction and expansion joints, are embedded in concrete, across and along the joint, to form a continuous watertight diaphragm that prevents the passage of fluid through the joint.
MAIN PARAMETERS OF PVC WATERSTOPS:
Width:150-400mm
Length: Fixed-length cut
Output: 150-160kg/h
Dimensions:According to the drawing
ENVIRONMENTAL CONDITION:
Location Indoors
Power Supply No dangerous area
Humidity ≤95%
Temperature 0-40ºC
Power 3-phase, 380V, 50Hz
Total Installed Power ≤100KW
Cooling Water ≤25ºC ≥0.3MPa, outdoor water tank: 10-20m3, water circulated with production line
Compressed air 0.3 m³ /min, >0.5MPa,
Equipped with 3kw air compressor
Production Line Dimension 20m*2.5m*2.8m
Flow chart:
Mixer→Loader→Extruder→Mould→Cooling platform→Hauling machine→Punching machine→Cutting machine→Winder
